Kinetic E-Bike
Designed for getting out in the woods, commuting and exploring - taking you further than you thought possible. The Kinetic E-bike from Calibre has been developed in conjunction with Danish e-bike specialists Promovec.
It takes their expert knowledge and state of the art e-bike system and couples it with Calibre’s award winning Two cubed mountain bike geometry, creating an e-bike that is a step ahead of the competition.
The 250W hub motor gives you a top assisted speed of 15mph, with a range of up to 40 miles, and there's even a 4kmph walk assist mode - so if you have to push the bike it helps you out!
With an LED display that includes a speed sensor and data panel, you're always in full control, and there's a clever heat sync in the downtube to keep the battery cool and safe. Promovec also have a full UK based support team.
Read our ebike buyer’s guide for advice on motors, batteries and other componentry.
- 250W hub motor – assisted speeds of up to 15mph
- 40-mile range
- 4km/h walk assist mode
- Brakes – Clarks M2 hydraulic disc brakes with 160mm rotors
- BB - 73mm Square taper
- Cassette/Freewheel – Shimano HG200 12-32T
- Chainset – Cyclone 24/34/42
- Fork – Suntour SF18-XCM
- Frame – 6061 Alloy frame (using Two3 award winning geometry)
- Front hub – alloy quick release
- Gear details – Shimano 24 speed
- Gear shifters – Shimano Acera M310
- Handlebar – Calibre Trail 780mm width, 20mm rise – 31.8mm
- Head set – A-head
- Pedals – Alloy platform pedal
- Front derailleur – Shimano FD-TZ500
- Rear derailleur – Shimano Altus RD-M310
- Rear hub – Promovec e motor system
- Rims – Calibre Trail 36H
- Saddle – Calibre
- Seatpost – Calibre trail 27.2 x 350mm
- Speed – 24
- Stem – Calibre trail 45mm with 31.8mm clamp
- Tyres – Kenda K1010 2.35” front and Kenda 1027 2.10 rear
- Wheel size – 27.5”
- Weight: 14.9kg (without pedals)
- Recommended activity – cycling / commuting
Please note: some minor specification changes may occur without notice. Any changes will use equivalent or higher quality parts.
Building your bike: Bikes purchased online are delivered boxed and will require assembly before they can be used. View the GO Outdoors Bike Assembly guide for more info, including step-by-step and video instruction guides.
We are happy to assemble your bike for FREE at any GO Outdoors store with a bike servicing department (this excludes all GO Express stores, and selected other GO locations). Please call ahead to confirm that you would like us to build your bike. You can find store details and phone numbers here. Every bike sold also comes with FREE 6 week safety check.
Can't get to a GO store? Our partners at LeisureLakes bikes will also assemble and inspect any new bikes purchased from our website. You can book a LeisureLakes appointment here.
Warranty and Returns info: Unfortunately, we are not able to process faulty or warranty bike returns through our warehouse. If your bike develops a fault please contact your nearest GO Outdoors store with a bike servicing department where they will be able to help you. Please call to discuss and book an appointment before you go to store. You can find store details and phone numbers here.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Kinetic E-Bike
Kinetic E-Bike
Designed for getting out in the woods, commuting and exploring - taking you further than you thought possible. The Kinetic E-bike from Calibre has been developed in conjunction with Danish e-bike specialists Promovec.
It takes their expert knowledge and state of the art e-bike system and couples it with Calibre’s award winning Two cubed mountain bike geometry, creating an e-bike that is a step ahead of the competition.
The 250W hub motor gives you a top assisted speed of 15mph, with a range of up to 40 miles, and there's even a 4kmph walk assist mode - so if you have to push the bike it helps you out!
With an LED display that includes a speed sensor and data panel, you're always in full control, and there's a clever heat sync in the downtube to keep the battery cool and safe. Promovec also have a full UK based support team.
Read our ebike buyer’s guide for advice on motors, batteries and other componentry.
- 250W hub motor – assisted speeds of up to 15mph
- 40-mile range
- 4km/h walk assist mode
- Brakes – Clarks M2 hydraulic disc brakes with 160mm rotors
- BB - 73mm Square taper
- Cassette/Freewheel – Shimano HG200 12-32T
- Chainset – Cyclone 24/34/42
- Fork – Suntour SF18-XCM
- Frame – 6061 Alloy frame (using Two3 award winning geometry)
- Front hub – alloy quick release
- Gear details – Shimano 24 speed
- Gear shifters – Shimano Acera M310
- Handlebar – Calibre Trail 780mm width, 20mm rise – 31.8mm
- Head set – A-head
- Pedals – Alloy platform pedal
- Front derailleur – Shimano FD-TZ500
- Rear derailleur – Shimano Altus RD-M310
- Rear hub – Promovec e motor system
- Rims – Calibre Trail 36H
- Saddle – Calibre
- Seatpost – Calibre trail 27.2 x 350mm
- Speed – 24
- Stem – Calibre trail 45mm with 31.8mm clamp
- Tyres – Kenda K1010 2.35” front and Kenda 1027 2.10 rear
- Wheel size – 27.5”
- Weight: 14.9kg (without pedals)
- Recommended activity – cycling / commuting
Please note: some minor specification changes may occur without notice. Any changes will use equivalent or higher quality parts.
Building your bike: Bikes purchased online are delivered boxed and will require assembly before they can be used. View the GO Outdoors Bike Assembly guide for more info, including step-by-step and video instruction guides.
We are happy to assemble your bike for FREE at any GO Outdoors store with a bike servicing department (this excludes all GO Express stores, and selected other GO locations). Please call ahead to confirm that you would like us to build your bike. You can find store details and phone numbers here. Every bike sold also comes with FREE 6 week safety check.
Can't get to a GO store? Our partners at LeisureLakes bikes will also assemble and inspect any new bikes purchased from our website. You can book a LeisureLakes appointment here.
Warranty and Returns info: Unfortunately, we are not able to process faulty or warranty bike returns through our warehouse. If your bike develops a fault please contact your nearest GO Outdoors store with a bike servicing department where they will be able to help you. Please call to discuss and book an appointment before you go to store. You can find store details and phone numbers here.
Original: $1,262.03
-70%$1,262.03
$378.61Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Designed for getting out in the woods, commuting and exploring - taking you further than you thought possible. The Kinetic E-bike from Calibre has been developed in conjunction with Danish e-bike specialists Promovec.
It takes their expert knowledge and state of the art e-bike system and couples it with Calibre’s award winning Two cubed mountain bike geometry, creating an e-bike that is a step ahead of the competition.
The 250W hub motor gives you a top assisted speed of 15mph, with a range of up to 40 miles, and there's even a 4kmph walk assist mode - so if you have to push the bike it helps you out!
With an LED display that includes a speed sensor and data panel, you're always in full control, and there's a clever heat sync in the downtube to keep the battery cool and safe. Promovec also have a full UK based support team.
Read our ebike buyer’s guide for advice on motors, batteries and other componentry.
- 250W hub motor – assisted speeds of up to 15mph
- 40-mile range
- 4km/h walk assist mode
- Brakes – Clarks M2 hydraulic disc brakes with 160mm rotors
- BB - 73mm Square taper
- Cassette/Freewheel – Shimano HG200 12-32T
- Chainset – Cyclone 24/34/42
- Fork – Suntour SF18-XCM
- Frame – 6061 Alloy frame (using Two3 award winning geometry)
- Front hub – alloy quick release
- Gear details – Shimano 24 speed
- Gear shifters – Shimano Acera M310
- Handlebar – Calibre Trail 780mm width, 20mm rise – 31.8mm
- Head set – A-head
- Pedals – Alloy platform pedal
- Front derailleur – Shimano FD-TZ500
- Rear derailleur – Shimano Altus RD-M310
- Rear hub – Promovec e motor system
- Rims – Calibre Trail 36H
- Saddle – Calibre
- Seatpost – Calibre trail 27.2 x 350mm
- Speed – 24
- Stem – Calibre trail 45mm with 31.8mm clamp
- Tyres – Kenda K1010 2.35” front and Kenda 1027 2.10 rear
- Wheel size – 27.5”
- Weight: 14.9kg (without pedals)
- Recommended activity – cycling / commuting
Please note: some minor specification changes may occur without notice. Any changes will use equivalent or higher quality parts.
Building your bike: Bikes purchased online are delivered boxed and will require assembly before they can be used. View the GO Outdoors Bike Assembly guide for more info, including step-by-step and video instruction guides.
We are happy to assemble your bike for FREE at any GO Outdoors store with a bike servicing department (this excludes all GO Express stores, and selected other GO locations). Please call ahead to confirm that you would like us to build your bike. You can find store details and phone numbers here. Every bike sold also comes with FREE 6 week safety check.
Can't get to a GO store? Our partners at LeisureLakes bikes will also assemble and inspect any new bikes purchased from our website. You can book a LeisureLakes appointment here.
Warranty and Returns info: Unfortunately, we are not able to process faulty or warranty bike returns through our warehouse. If your bike develops a fault please contact your nearest GO Outdoors store with a bike servicing department where they will be able to help you. Please call to discuss and book an appointment before you go to store. You can find store details and phone numbers here.
